Essex Electronics K1 Series Manuel d'instructions télécharger pdf (Page 7)

Essex Electronics, Inc. | 805.684.7601 | 800.KEY-LESS | fax 805.684.0232 | keyless.com

 Output Capabilities

The KE-265 provides two SPDT dry contact relays (rated at 6

amps at 120 VAC). Each relay can be congured to perform one of

many different functions depending on the specic access control

requirement. User Authorization to control each relay is determined

by Setting Relay Options (see System Hardware Setup on page 11).

Each relay can be congured for one of the following options:

1. Voltage Output – For any Fail Safe or Fail Secure Locking Device

2. Dry Contact Output – For control of Gate Operator or Garage

Door.

3. CCTV or Light Controller – First key press triggers a 10 second

output.

4. Doorbell – Press * at the Keypad to trigger a 1 second output for

a doorbell (not included). This function is only available with a 12

Pad 3x4 or Thinline 2x6.

5. Auxiliary Output – Momentary or Manual Control of an electronic

device.

1 2 3 4 5 6 7 8 9 10 11 12 ... 35 36

Pas de commentaire

Essex Electronics K1 Series Manuel d'instructions Page 7