Essex Electronics K1 Series Manuel d'instructions télécharger pdf (Page 16)

Essex Electronics, Inc. | 805.684.7601 | 800.KEY-LESS | fax 805.684.0232 | keyless.com

! 8 Bit Word Connector Wiring

BLUE - CCTV

Pressing any position on the Keypad will generate a 30 second

0.25 amp intermittent duty grounding output.

ORANGE - LED Control

The ORANGE wire allows the choice of controlling the RED &

GREEN LED’s on the Keypad with either 1 wire (BROWN) or 2

wires (BROWN & YELLOW).

CONFIGURATION

PINS- “CONFIG”

VOLTAGE SELECT

(Do NOT apply voltage)

12-24V (default)- Jumper on

one pin only

5V- Jumper on both pins

YELLOW- LED Control

(Do NOT apply voltage)

PINK- NOT USED

(Do NOT apply voltage)

BLUE- CCTV

BROWN- LED Control

(Do NOT apply voltage)

TAN- Earth Ground

BLACK- Ground

ORANGE- LED Select

(Do NOT apply voltage)

VIOLET- NOT USED

RED- Input Voltage

WHITE- Data 1’s

GREEN- Data 0’s

NOTE: The 2x6 connector is rotated 180 degrees

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 35 36

Pas de commentaire

Essex Electronics K1 Series Manuel d'instructions Page 16